First, the main technical parameters: 1. Host Dimensions approximately: 4.0 × 0.61 × 1.22 (L × W × H) m rewinding mechanism Dimensions approximately: 1.0 × 0.7 × 1.55 (L × W × H) m 2. Heating and drying method: two sub-zone temperature control, stainless steel heat pipe heating and drying. 3. Drying temperature: room temperature ---- 130 ℃ Digital display, continuously adjustable, temperature control accuracy ± 2 ℃. 4. Power supply: three-phase 380VAC, ± 10%, 50HZ. 5. Maximum power: 12KW 6. Scraper method: casting box way; 7. Controlling the feed mode and casting speed: with nitrogen (also available clean air) from the pressure cooker pressed out by air pressure to adjust the casting speed. (Supply source is prepared by the purchaser) 8. Flow film thickness and uniformity: controlled by adjusting the micrometer adjustment casting knife gap. 1) Common thickness: 0.025mm ---- 0.085mm continuously adjustable; cast film thickness uniformity: ± 0.002mm. 2) Thickness ≥0.085mm, cast film thickness uniformity ≥ ± 0.002mm. 9. Flow film width: common width is 190mm; replaceable cartridge casting choice in 100 --- 190mm width; or by adjusting the strip within walking speed and casting pressure cooker, adjust the width of the tape cast film. 10. Transfer rate: The continuously adjustable speed motor strip speed 400 ~ 4000mm / min, the strip offset ± 2mm.